Creează un cont pentru a te abona la acest blog și a-i urmări articolele pe pagina Lectură.
-
My son's car (2016 Peugeot 208) quite suddenly threw up some alarming-looking warnings recently about ABS, ESP and tyre-pressure monitoring not working.
-
This turned out to be more annoying problem than I expected.
-
This wasted several hours on me.
-
Consider this bit of code:- def foo(): print("Called foo()") try: print("In the 'try' block") 10 / 0 except Exception as e: print("Got an exception: ", str(e)) finally: print("In the 'finally' block") print("About to return from foo() at the bottom") foo()
-
This is a follow-up to my earlier earlier post: if you haven't already done so, I suggest reading that one first.
-
If you are using the millis() function to measure time on an Arduino, you might be tempted to do something like this:- unsigned long timer_expires_at = millis() + SOME_DURATION; while (millis() < timer_expires_at) { [do other stuff while waiting for the t…
-
Let me state from the outset that my knowledge of RF and antenna design is very rudimentary.
-
These are wonderful little things.
-
This packet contains 12 sweets of 4 different colours (black, red, yellow and - my favourites - green).
-
This was a pain-in-the-ass to troubleshoot, so I'm sharing the story here in the hope that it will help someone else.
-
A weird Windows 10 problem this morning.
-
The 30/40dB pad from my previous post works fantastically well.
-
I had a requirement to connect the (line-level) output from a small mixing desk into the microphone input on my camera (mic-level, obviously).
-
Modern smartphones have a wealth of sensors that provide all sorts of avenues for amusement for modern geeks.
-
Something I have always found a little confusing was the idea of signal mixing.
-
I have been studying the classic and venerable 555 Timer IC recently and have created an animation showing the various signals on it as it moves from state to state. http://bogpeople.com/555/ Also a video...
-
I ran into an interesting problem in work today.
-
Like lots of electronics hobbyists, I have an old ATX power supply salvaged from a PC that I use as a bench power supply.
-
For a project I'm working on, I have a requirement to butt-join some power cables together.
-
I am not connected with politics or constitutional law in any way.
-
This is my second post about the plague of knock-off ICs.
-
Spot the Chinese knock-off.
-
They say that a picture tells a thousand words.
-
My trusty little LED Lenser flashlight stopped working rather suddenly.
-
I have just finished reading "The Great Crash, 1929" by John Kenneth Galbraith.