F4FXL

I am running several DStar repeaters using an AMPR Net public IP address.

In my mobile setup, I want to run a Direwolf instance with two ports (VHF and HF) on an Orange Pi Zero.

In this article I will expose how I built a VHF (1200bps AX25 APRS) to UHF LoRa APRS Bridge without going through APRS-IS (Internet).

In december 2021 I started to work on a project “by accident”.

Most of Linux distributions have Xastir in their repositories , yet most of the time it is not the latest version or it is seriously outdated.

I was suspecting a receive issue on our club’s mountain top APRS digipeater.

I have been using the TM-271 for my mobile APRS operation for over 18 Months now.

Here is a provocative/clickbait headline, and it is on purpose.

Direwolf is very capable software TNC, yet it is not yet possible to add twist between the high and low tone e.g if you want to feed 1200bps to the 9600bps flat audio input of … Source

Recently I got myself a Kenwood TM-271 and wanted to give it a go on APRS with the TT4.