Deschide articolul original într-un tab nou Schimbarea acestei opțiuni se aplică imediat și reîncarcă pagina.
LECTURA
← Înapoi la Urmăritori

sdz-mods.com

sdz-mods.com/index.php/feed/
Vizitează site-ul

Cel mai recent articol

Ultima verificare

Urmăritori 0 urmăritori
Articole: 10

  1. SGI O2 RM7000C@800MHz – CPU upgrade and OC guide

    (sdz-mods.com)

    Items needed: -RM5271/RM7000 CPU module.

  2. GLQuake IRIX MesaFX port

    (sdz-mods.com)

    GLQuake port with MesaFX backend, with dual TMU support.

  3. Quake2 IRIX MesaFX/miniGL ports

    (sdz-mods.com)

    Quake2 ports with MesaFX and (newly written) miniGL backends, both with dual TMU support.

  4. SGI O2 PROM ISP

    (sdz-mods.com)

    In-system programmer for the SGI O2 system PROM.

  5. IRIX 3dfx Voodoo driver + IRIX glide2x port & MesaFX port

    (sdz-mods.com)

    At the moment only SST1 (Voodoo1) is supported on IP32 (O2).

  6. S3 Savage4 Pro PCI low profile HDMI

    (sdz-mods.com)

    Low profile S3 Savage4 Pro PCI 32MB card with VGA and HDMI(technically DVI over HDMI connector) outputs.

  7. SGI O2 CPU PROM emulator

    (sdz-mods.com)

    PROM emulator for the PROM IC that sits on the SGI O2 R5k/RM5271/RM7000A (and other CPUs that can be fitted on there) modules.

  8. SGI O2 system PROM socket adapter

    (sdz-mods.com)

    Socket adapter for the O2 system PROM, so that the flash can be easily removed and programmed externally when needed.

  9. SGI O2 128MB DRAM module

    (sdz-mods.com)

    New 128MB RAM modules for the SGI O2.

  10. Voodoo Rush 4440 + Rush information

    (sdz-mods.com)

    I made this card to test if a Voodoo Rush with two TMUs can be made: When the second TMU is enabled in hardware, the card works fine, but with only 1 TMU actually used.